Porsche 356A seats
I am selling a matched set of original Porsche 356A Fatback seats
will fit coupe or cabriolet
Overall condition is good, minor blemishes
Still covered with the original Vinyl
will need re-upho...
Member since 10/18
Porsche 356 A Front Brake Drum
Porsche 356 A Front Brake Drum good used condition, fitment is 1953-59 356, 356 A cars, no separation of the steel liner from the aluminum drum, fits left or right side
Member since 04/14
1962 356B red stubby Screwdriver
356B red stubby tool kit screwdriver (SD) hand made with vintage SD blade & ferrule meeting dimensional and appearance requirements described in 356 Registry tool kit screwdriver standards at http:...
group of fuel pump spacers/mounting brackets & push rods for PreA - SOLD pdg pymt
group of PreA/2pc case fuel pump spacers/mounting brackets (2 NOS) with pushrods - sell as group, ship in med flat rate box
Horn Grill for B,C
Lower horn grill used for B,C.
Original 356A Horn Grills
Pair of Horn Grills removed from a 356A coupe. Will need a total rechrome job. One screw post on one of the grills is broken off. See photos.
Original 356 Luggage and Tire strap clamps
3 luggage strap and one spare tire strap clamp. The two clamps on the top ow appears to be a matched set
Pre A Turbo Ring
WTB one original turbo - beauty -ring
356a t1 ignition switch C-profile
Hi, looking for a C-profile key ignition switch dated 1956. preferably with key code C118. This is with starter function.
looking forward to hear from you.
Member since 12/18
Nice Original Blue Tip Antenna
am NO expert on these Blue Tips, but I do know there very hard to find these days , too me the hardware around base looks later , not sure if it's all there, but the most important piece the Tip is...
WANTED - 1957 356A Door Lock Cylinder
Looking for a nice, used cylinder to retrofit to the passenger side door handle. The lock cylinder went missing in 1972, apparently.
Car is back on the rode after a 48 year rest.
Super 90 Valve Cover Hardware (screens and balls)
Nice set of original Super 90 Valve Cover screens and balls. No corrosion, no issues. Excellent condition.
Abarth 356 a and or Early 911 abarth exhaust
WTB: Early 356 Cylinder Head Tin
Wanted: Looking to purchase early 356 cylinder head tin. 1 single piece or 4 pieces is OK. See photos. Notice that there is NO "RIDGE/BUMP" ON THE EARLY HEAD TIN where the head tin meets the bl...
Momo Steering Wheel
This is a brand new Momo steering wheel. I purchased it and painted the "yellow" letters and center band "green" because I was matching my green leather interior. I paid $239 plus tax/shipping. Aft...
Member since 06/18
Hub cap hubcap 2/59
Needs dents removed and to be rechromed
Member since 10/16
B / C backing plates
B/C backing plates. Set of 4. L & R front and rear.
Shipping about $40 CONUS (if less will refund difference) if more I will cover.
Solid, no rust - just need repainting
VW / 356 Dash Knobs and Shift Knob (original)
This is a set of three Ivory early dash knobs and one Grey dash knob and shift knob all in very nice condition
FS - C/SC Front Spindles
First $475 for the pair
early aluminum pushrods - Sold pdg pymt
early aluminum pushrods - ?mid to late preA, early A?
golde sunroof tool
made from 303 stainless steel , a high quality reproduction , made by me personally, a must for and electric sun roof owner this tool allows you to manu. move your sunroof without any power. it was...
gt brake hardware kit
includes the following
4 aluminum spacer blocks
4 stainless steel banjo bolt extentions
4 stainless steel extended brake bleeders
2 stainless steel banjo bolts
16 stainless steel screws
B/C no hole frnt plate holder
Description no front plate. like to take care of the ticket. how about a no drill the holes in your car all alum clamp to the bumper copello plate holder. comes complete less the plates of course. ...
4 cam fan nose cone nut
Hand made stainless steel 4 cam nose cone nut. It holds the cone to the fan.
Copyright © 2008-2021 356 Registry Inc.
All Rights Reserved