Recent Articles

Minutes 24 February 2019 Trustee Meeting, Lakeland FL
Porsche 356 Registry High Desert Holiday is Full
Porsche 904 Factory Owner's Manual
Porsche 904 Factory Service and Technical Bulletins - English Versions

Categories

Articles Listed by Categories
Research & Identification
Safety & Driving
Troubleshooting & Repair
356 History
Tech Article Finder

Script Locations

September 25, 2010 | Research & Identification

By Bruce Coen

I was able to locate the original holes on my 1959 Super Coupe. I used the baselines of the scripts and the edge of the hood openings as my reference points. Script locations for other years and models may vary!

Front "PORSCHE" : Top of baseline is 42mm or 1-5/8 inches below lowest edge of hood opening. Center line is at left edge of S in PORSCHE.

Rear "PORSCHE" : Top of baseline is 65mm or 2-1/2 inches below lowest edge of engine opening. Center line is at left edge of S in PORSCHE.

Rear "1600 SUPER" : Top of baseline is 93mm or 3-1/8 inches below lowest edge of engine opening. Center line is at right edge of 6 in 1600.

0 Comments