Parking brake handle assembly

thestable@firstworld.net

08/05/2001 03:16 AM

I will do a simple drawing of the parts but first you need the following:
Remove the pull mechanism from the car. The locking system is comprised of 4
parts starting from the pull handle forward. Stop plate that looks like a
plate of metal that has a Pointy end on it and a six sided hole. Spring of
about 1/2 inch dia. and about 3/4 inch long. A very thick, 1/4 inch, bent
washer lock plate with a 6 sided hole in it. and lastly a thin steel washer,
flat and round hole in it. This is also the order from rear to front. Will
do the drawing and send it out ASAP.
Sincerely,
Alan,
The Stable, San Francisco